Delivery throughout Europe

Ordered before 16:00 = Shipped today

Fast delivery with DHL

XNUMX days return *


Country

Prototyping

Prototyping means: an early model of a product, or rather a prototype. A project usually has gone through several phases before it becomes a final product. For example, you can use a breadboard test multiple phases of your project. You can use the jumper for this wires† These cables can be board plugged in without having to solder it.

If you are happy with the result of your project and you want to “record” it definitively. Then use one prototyping board† On this board you can easily solder the parts.

Shows all 7 results

  • DC to alligator clips

    2.1mm DC Barrel plug to Alligator Clips

    2,44 /2,02 excl. VAT
  • Alligator clip 35mm red

    Alligator clip – Red 35mm

    0,75 /0,62 excl. VAT
  • Alligator clip 35mm black

    Alligator clip - Black 35mm

    0,75 /0,62 excl. VAT
  • Banana plug black 4mm

    Banana plug - Black 4mm

    0,96 /0,79 excl. VAT
  • Micro USB DIP adaptor

    Micro USB to DIP adapter – 5 pin

    0,80 /0,66 excl. VAT
  • Test hook clamp red

    Test Hook Clamp for Logic Analyzer – Red

    0,96 /0,79 excl. VAT
  • Test hook clamp black

    Test hook clamp for logic analyzer - Black

    0,96 /0,79 excl. VAT

Why buy prototyping?

What should you pay attention to when buying prototyping?

Prototyping is ideal if you want to practice programming. Through a breadboard you can move the cables as much as you want. You can also place the components in different places. You can use components more often, because you do not solder them. However, it is important that the parts are replaced after a while. This is because they qualitatively are less good. Take a resistance for example. After using it a number of times, it may provide less resistance. Then it is wise to use a new one. Have you found a setup that you are happy with? Then solder on one prototyping board the parts.
 

jumper wires

jumper wires are wires attached to a connector at the ends pine to have. because of this only je componentsconnect them together without soldering. You often place the components on the breadboard† These can be done with the wires be connected to each other or to the in/out puts of the motherboard† The cables are available in different types. You have the male-male wire, the female-female wire and the male-female wire. The jumper wires are available in 10 or 20cm.  

The rating of www.elektronicavoorjou.nl at WebwinkelKeur Reviews is 9.3/10 based on 4778 reviews.