Delivery throughout Europe

Ordered before 16:00 = Shipped today

Fast delivery with DHL

XNUMX days return *


Country

Arduino Mega 2560 Rev3

(3 customer reviews)

41,95 /34,67 excl. VAT

Add to cart

  • Delivery throughout Europe
  • Ordered before 16:00 tomorrow Indoor
  • Express ordered before 11:30 am tonight at home*
  • 14 days free return *
  • Can also be collected from us in Leusden!

Description Arduino Mega 2560 Rev3

The Arduino Mega is a powerful microcontroller board. It is specially designed for advanced electronic projects where a lot of I/O is required. The board is based on the ATmega2560 microcontroller. It features 54 digital input and output ports, 16 analog inputs and various additional functions. This makes it easy to create complex projects.
The Mega board is compatible with a wide variety of sensors, motors and other components. The Mega is therefore ideal for projects such as robotics, 3D printing and automation. It board can be easily programmed via the free Arduino IDE software.
The Arduino Mega comes with a range of useful features. Including a USB interface for uploading a code. There is also a reset button on it board to restart a code when needed. Shields are also available for the Arduino Mega to expand the functionality. Because the Arduino Mega is the big brother of the Arduino Uno do the Uno shields also fit on the Mega.

Specifications Arduino Mega

microcontrollers ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I / O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current for I / O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz
LED_BUILTIN 13
Length 101.52 mm
Width 53.3 mm
Weight 37 g

 

Pinout Arduino Mega

  1. Digital I/O pins (0-53):
    • Pins 0 to 53 can be used as a digital input or output.
    • Pins 14 to 21 provide pulse width modulation (PWM) output.
  2. Analog Input Pins (0-15):
    • Pins A0 to A15 can be used as analog inputs.
  3. TX/RX Pins (0, 1):
    • Pin 0: RX - Receive
    • Pin 1: TX - Send
  4. External Break Pins (2, 3, 18, 19, 20, 21):
    • These pins can be used for external interrupts.
  5. PWM pins (2 to 13, 44 to 46):
    • Pins 2 to 13 and 44 to 46 provide PWM output.
  6. SPI pins (50, 51, 52, 53):
    • Pin 50: MISO
    • Pin 51: MOSI
    • Pin 52: SCK
    • Pin 53: SS
  7. I2C pins (20, 21):
    • Pin 20: SDA
    • Pin 21: SCL
  8. UART (Serial) Communication:
    • Pins 0 (RX) and 1 (TX) for serial communication.
  9. ResetPin:
    • Pin Reset: This pin is used to reset the microcontroller.
  10. Power Pins:
    • 5V: Supplies power to the board.
    • 3.3V: Provides 3.3V regulated output.
    • GND: Ground stakes.
  11. AREF pin:
    • AREF: Analog reference pin.
  12. IOREF pin:
    • IOREF: This pin provides the reference voltage used as an input to the analog pins.
  13. Vin pin:
    • Vin: The voltage supplied to the board, which may be different from the 5V pin.
  14. Crystal Oscillator Pins:
    • XTAL1: Input to the inverting oscillator amplifier.
    • XTAL2: Output of the inverting oscillator amplifier.

3 reviews for Arduino Mega 2560 Rev3

  1. Patrick van de Kleut (verified owner) -

    You can make fun things with it.

  2. MG Disselen (verified owner) -

    It is a Chinese clone, it took a lot of effort to connect to the PC because the USB was not recognized. Finally found the solution after much effort. Now working satisfactorily!

    • sim admin -

      Thank you for your review. However, it is definitely not a clone. Because we think Arduino innovations are important, we only sell those made in Italy boards.
      If you have further problems with the Arduino, you can contact us at info@elektronicavoorjou.nl
      Anyway, have fun with your Arduino!

  3. Pick up (verified owner) -

    Not yet used

Add a review

The email address will not be published. Required fields are marked with *