Free shipping from € 74,95 NL (€ 99,95 BE / DE)

Ordered before 16:00 tomorrow at home

Express ordered before 11:30 am tonight at home*

14 days free return *

Logo Electronics For You


Arduino MKR Vidor 4000

74.95 /61.94 excl. VAT

2 in stock (can be backordered)

  • Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
  • Ordered before 16:00 tomorrow at home
  • Express ordered before 11:30 am tonight at home*
  • 14 days free return *
  • Can also be collected from us in Leusden!
Item: MKR1002 categories: , ,

Description MKR Vidor 4000

You can configure the MKR VIDOR 4000 the way you want; you can essentially create your own controller card.
It is loaded with hardware and potential:
- an 8 MB SRAM;
- a 2 MB QSPI Flash chip - 1 MB allocated for user applications;
- a Micro HDMI connector;
- a MIPI camera connector;
-Wifi & BLE powered by U-BLOX NINA W10 Series.
It also includes the classic MKR interface on which all pins are powered, both by SAMD21 and FPGA.
In addition, it has a Mini PCI Express connector with up to 25 user-programmable pins.

The FPGA contains 16K logic elements, 504 KB of embedded RAM and 56 18x18 bit HW multipliers for high-speed DSP.
Each pin can switch at over 150MHz and can be configured for functions such as UARTs, (Q) SPI, high resolution / high frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc.
The built-in FPGA can also be used for high-speed DSP operations for audio and video processing.
This board also has a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless.

Getting started with the Vidor 4000

You can in it Getting Started section find all the information you need to configure your board, use the Arduino Software (IDE) and start tinkering with coding and electronics.

Specifications:

FPGA Intel Cyclone 10CL016
Mini PCI Express port with programmable pins
Camera connector MIPI camera connector
Circuit Operating Voltage 3.3V
Digital I / O Pins 22 headers + 25 Mini PCI Express
PWM Pins All Pins
UART Up to 7 (depends on FPGA configuration)
SPI Up to 7 (depends on FPGA configuration)
I2C Up to 7 (depends on FPGA configuration)
Analog Input Pins n / A
Analog Output Pins n / A
External Interrupts n / A
DC Current for I / O Pin 4 or 8mA
Flash Memory 2 MB
SDRAM 8 MB
EEPROM n / A
Clock Speed 48MHz - up to 200MHz
Video Output micro HDMI

 

microcontrollers Microchip ATSAMD21 (Arm Cortex-M0 + processor)
Wi-Fi U-blox Nina-W102
(FIN) 5V
Supported Battery (*) Li-Po Single Cell, 3.7V, 700mAh Minimum
Circuit Operating Voltage 3.3V
Digital I / O Pins 22
PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
UART 1
SPI 1
I2C 1
Analog Input Pins 7 (ADC 8 / 10 / 12 bit)
Analog Output Pins 1 (DAC 10 bit)
External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
Flash Memory 256 KB
SRAM 32 KB
EEPROM No
Clock Speed 32.768 kHz (RTC), 48 MHz
LED_BUILTIN 6
Full-Speed ​​USB Device and Embedded Host Included
LED_BUILTIN 6
Length 83 mm
Width 25 mm
Weight 32 g

Reviews

There are no reviews yet.

Be the first to review “Arduino MKR Vidor 4000”

The email address will not be published. Required fields are marked with *

Ask about the possibilities
We will contact you asap

SEND
close-link