Free shipping from € 74,95 NL (€ 99,95 BE / DE)

Ordered before 16:00 tomorrow Indoor

Express ordered before 10:30 am tonight at home*

14 days free return *

Logo Electronics For You

Arduino MKR WiFi 1010

32,68 /27,23 excl. VAT

19 in stock (can be backordered)

  • Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
  • Ordered before 16:00 tomorrow Indoor
  • Express ordered before 11:00 am tonight at home*
  • 14 days free return *
  • Can also be collected from us in Leusden!
Item: MKR1005 categories: , ,

Description Arduino MKR WiFi 1010

The MKR WIFI 1010 is a significant improvement over the MKR 1000 WIFI.
It is equipped with an ESP32 module made by U-BLOX.
This board aims to accelerate and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and the low power consumption.
The MKR WIFI 1010 also has a WiFi and Bluetooth module based on ESP32.
The board consists of three main blocks:

  • SAMD21 Cortex-M0 + 32bit Low Power ARM MCU;
  • U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b / g / n Wi-Fi; and
  • ECC508 Crypto Authentication. (datasheet)

The MKR WIFI 1010 includes 32-bit computing power, the usual rich set of I / O interfaces and low power Wi-Fi with a cryptochip for secure communication with SHA-256 encryption.
Plus, it offers ease of use Arduino Software (IDE) for code development and programming.
All these features make this board the preferred choice for the emerging IoT battery powered projects in a compact form.
The USB port can be used to power the board (5V).
It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power. Switching from one source to another is done automatically.

Warning: Unlike most Arduino boards, the MKR WIFI 1010 runs at 3,3V.
The maximum voltage that the I / O pins can tolerate is 3,3 V.
Applying voltages higher than 3,3 V to an I / O pin can damage the card.
Although output to 5V digital devices is possible, bidirectional communication with 5V devices should be moved correctly.

Get started with the MKR WiFi 1010

You can in it Getting Started section find all the information you need to configure your board, use the Arduino Software (IDE) and start tinkering with coding and electronics.



microcontrollers SAMD21 Cortex-M0 + 32bit Low Power ARM MCU
Board Power Supply (USB / VIN) 5V
Supported Battery (*) Li-Po Single Cell, 3.7V, 700mAh Minimum
Circuit Operating Voltage 3.3V
Digital I / O Pins 8
PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
I2C 1
I2S 1
Connectivity WiFi
Analog Input Pins 7 (ADC 8 / 10 / 12 bit)
Analog Output Pins 1 (DAC 10 bit)
External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
DC Current for I / O Pin 7 mA
Flash Memory 256 KB
Clock Speed 32.768 kHz (RTC), 48 MHz
Full-Speed ​​USB Device and Embedded Host Included
Length 61.5 mm
Width 25 mm
Weight 32 gr.


There are no reviews yet.

Be the first to review “Arduino MKR WiFi 1010”

The email address will not be published.