Arduino Portenta H7
€114,95 /€95,00 excl. VAT
2 in stock
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Description Arduino Portenta H7
Program it with high-quality languages and AI. This while performing low-latency operations on the customizable hardware. The Portenta H7 simultaneously executes high-level code along with real-time tasks. The design includes two processors that can perform tasks in parallel. For example, it is possible to run Arduino compiled code together with MicroPython one. Then you can let both cores communicate with each other. The Portenta functionality is two-fold and can be implemented like any other embedded microcontroller board. Or as the main processor of an embedded computer. Use the Portenta Carrier board to turn your H7 into an eNUC computer. This exposes all physical H7 interfaces. The Portenta can easily perform processes created with TensorFlow ™ Lite. You can use one of the cores on-the-fly have a computer vision algorithm calculated. This while the other can perform low-level operations. Such as operating a motor or acting as a user interface. Use Portenta when performance is a must. Examples of applications for the Portenta are:
-
High-quality industrial machines
-
Lab equipment
-
Computer vision
-
PLC's
-
Industry-ready user interfaces
-
Robotics controller
-
Business critical devices
-
Dedicated stationary computer
-
Fast start-up calculation (ms)
Two parallel cores
The main processor of H7 is the dual-core STM32H747, including a Cortex® M7 with 480 MHz and a Cortex® M4 with 240 MHz. The two cores communicate via a Remote Procedure Call mechanism that allows seamless call functions on the other processor. Both processors share all in-chip peripherals. The processors work with:
-
Arduino sketches on top of the Arm® Mbed ™ OS
-
Native Mbed ™ applications
-
MicroPython / JavaScript via an interpreter
-
TensorFlow™ Lite
Graphics accelerator
Probably one of the most interesting features of the Portenta H7 is the possibility of an external one monitor to connect. With this you can build your own special embedded computer with a user interface. This is possible thanks to the on-chip GPU of the STM32H747 processor, the Chrom-ART Accelerator ™. In addition to the GPU, the chip contains a special JPEG encoder and decoder.
A new standard for pinouts
The Portenta family adds two high-density 80-pin connectors to the bottom of the board. This provides scalability for a wide range of applications. By simply upgrading your Portenta board to the board that suits your needs.
Connectivity on board
The Portenta comes with a built-in wireless connection module. This module makes it possible to manage WiFi and Bluetooth® connectivity at the same time. The WiFi interface can be used as an Access Point, as a station or as a dual-mode simultaneous AP / STA. The module can handle a transfer rate of up to 65 Mbps. Bluetooth® interface supports Bluetooth Classic and BLE. It is also possible to uncover a range of different wired interfaces such as UART, SPI, Ethernet or I2C. both through some of the MKR styled connectors, as well as through the new Arduino industrial 80-pin connector pair.
Multiple options in one board
The standard Arduino Portenta H7 (codename H7-15EUNWAD) comes with:
-
STM32H747 dual core processor with graphics engine
-
8MB SDRAM
-
16MB NOR Flash
-
10/100 Ethernet Phys
-
USB HS
-
NXP SE050C2 Crypto
-
WiFi / BT Module
-
External Antenna
-
DisplayPort over USB-C
Specifications Arduino Portenta H7
| microcontrollers | STM32H747XI dual Cortex®-M7 + M4 32bit low power Arm® MCU (Datasheet) |
| radio module | Murata 1DX dual WiFi 802.11b / g / n 65 Mbps and Bluetooth 5.1 BR / EDR / LE (datasheet) |
| Secure Element (default) | NXP SE0502 (datasheet) |
| Board Power Supply (USB/VIN) | 5V |
| Supported Battery | Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger) |
| Circuit Operating Voltage | 3.3V |
| Current Consumption | 2.95 μA in Standby mode (Backup SRAM OFF, RTC / LSE ON) |
| display connector | MIPI DSI host & MIPI D-PHY to interface with low-pin count large display |
| GPU | Chrom-ART graphical hardware Accelerator ™ |
| Timers | 22x timers and watch dogs |
| UART | 4x ports (2 with flow control) |
| Ethernet PHY | 10/100 Mbps (through expansion port only) |
| SD Card | Interface for SD Card connector (through expansion port only) |
| Operational Temperature | -40 ° C to + 85 ° C |
| MKR Headers | Use any of the existing industrial MKR shields on it |
| High Density Connectors | Two 80 pin connectors will expose all of the board's peripherals to other devices |
| Camera interface | 8-bit, up to 80MHz |
| ADC | 3 × ADCs with 16-bit max.resolution (up to 36 channels, up to 3.6 MSPS) |
| DAC | 2 × 12-bit DAC (1 MHz) |
| USB-C | Host / Device, DisplayPort out, High / Full Speed, Power delivery, |
Reviews
There are no reviews yet.