Delivery throughout Europe

Ordered before 16:00 = Shipped today

Fast delivery with DHL

XNUMX days return *


Country

GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IoT Development Board

16,95 /14,01 excl. VAT

Available via backorder

  • Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
  • Ordered before 16:00 tomorrow Indoor
  • Express ordered before 10:30 am tonight at home*
  • 14 days free return *
  • Can also be collected from us in Leusden!
Article number: IoT1006 Categories:

Description GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IoT Development Board

The A9G development board is a multifunctional development board based on EMC's A9G GPRS / GSM + GPS / BDS module.
You can use it to verify the basic communication and peripheral functions of the A9G module.
It has the basic telephone / SMS, GPRS network communication and GPG / BDS dual mode positioning function.
There are lithium battery management, microphone, speaker interface, USB communication interface, multiple user keys / LED, TF card slot, acceleration sensor, SPI interface, I2C2 interface, ADC interface on the boards.
This is so that you can develop different features with it board.
The board has a camera expansion card, so you can connect an external 30W/200W camera.
It is also possible to use a slot machine function.
The A9G development board can be used for various peripheral prototype development verification, such as remote monitoring intercom with GSM and microphone / speakers, remote surveillance camera with GPRS + TF + camera expansion card, wechat payment machine schedule with the slot machine function.
You can also use it as:
- car theft with GPRS + GPS and accelerometer
- 1,54 inch capacitive touch screen smart watch with GPRS / GSM + GPS
- heart rate oxygen sensor
- 1,54 inch capacitive touchscreen elderly watch with GPRS / GSM + GPS.
Using the built-in functions, you can also use a custom device based on the Lua machine.

Characteristics:

  • Supports voice call and text message.
  • Supports GSM / GPRS frequency: 850/900/1800/1900 MHz.
  • Supports GPRS data service, the maximum download data rate is 85,6 Kbps, upload data is 42,8 Kbps.
  • Supports GSM07.07, 07 AT commands and Ai-Thinker explosion command.
  • Supports 3 serial ports, one download serial port, one AT command port.

Specifications:

  • Dimensions: 19,2 mm x 18,8 mm x 3 mm
  • Working temperature: -30 ℃ -80 ℃
  • Working voltage: 3.5v - 4.2v (It is best to power 4v)
  • Supply voltage:> 3.5v
  • Low energy consumption:
  • Sensitivity:
  • GPIO level: 2.8v

Link:

  • Connect USB-TTL with 4 wires when debugging, VUSB-5V; GND-GND; AT_TX-RX; AT_RX-TX
  • Or power via USB and then connect three more lines, GND-GND; AT_TX-RX; AT_RX-TX
  • Or power by lithium battery, VBAT- (3.3v-4.2) V; GND-GND; AT_TX-RX; AT_RX-TX; (VBAT power supply, must hold the power_key button for about 2 seconds)

Switch

  • A9G development board can be powered by USB or lithium battery.
  • It does not require any operation when feeding 1-2s.
  • Press the Rst_Key button to reset.
  • The module defaults to AT command mode.

Contains:

  • A9G Development Board x 1
  • GPRS antenna x 1
  • GPS antenna x 1

Additional information

IoT

, ,

Reviews

There are no reviews yet.

Be the first to review “GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IoT Development Board" to judge

The email address will not be published. Required fields are marked with *