AWMD-250 Mini built-in dimmer | ClickOnClickOff

You can install this KlikAanKlikUit AWMD-250 Mini built-in dimmer multi behind an existing single wall switch. This allows you to use the existing switch, and one or more ClickOnClickOff can dim channels dimmable lighting wirelessly. You are able to wirelessly dim incandescent lamps and halogen lighting from 20 to 250 watts with this receiver.

For 12 Volt halogen lighting in combination with a wire wound (coil) transformer, the minimum wattage is 40 Watt. Dimmable LED and energy-saving lamps can be dimmed from 3 to 24 watts with this dimmer. In order to successfully dim these various types of lighting, it is important to set the dimming range for the specific lamp. This way you are assured that you can dim the lighting you have chosen beautifully wirelessly.

After connecting the electrical wires, connect the two white wires to the existing single wall switch. Thus, the function of the single-pole switch is maintained. You can only connect these white wires to a single switch that is not part of a switch or hotel switch. If it is a hotel switch, you need to lift 1 of the 2 wall switches, so that you have 1 single wall switch. You can then place a mini flush-mounted transmitter behind the 2nd switch or replace this switch for a wireless wall switch.

You can only install this receiver behind a single wall switch, not behind a dimmer or pulse switch. You can control the receiver with any ClickOnClickOff transmitter with automatic code system, such as the AYCT-102 and ICS-1000. Built-in mini dimmer for wireless dimming of all dimmable lamps (max. 250 Watt).

Can be operated with various KlikAanKlikUit transmitters.

Can easily be placed behind an existing single wall switch
Suitable for dimming all types of dimmable lamps (max. 250 Watt)
Original wall switch can still be used