Arduino Make your UNO Kit

Description Arduino Make your UNO kit

This is the Make your UNO kit from Arduino. With this kit you can make a Arduino Uno with synthesizer shield. By soldering the separate components you make your own Arduino UNO. You can use it like any other normal Arduino. With this kit you will learn the basics of electronics. In a combination of physical activity and programming afterwards, you learn everything you need to know. By following the steps and reading the explanation you will learn how to solder. The step by step 3D tutorial is easy to use for everyone. When you're done with this kit, you'll have your own synthesizer built afterwards.

The Arduino Make your UNO kit includes

• Arduino Make Your UNO
  • 1 x Make Your UNO Circuit Board
  • 1 x USB-C adapter board
  • 7 x Resistor 1k Ohm
  • 2 x Resistor 10k Ohm
  • 2 x Resistor 1M Ohm
  • 1 x Diode (1N4007)
  • 1 x 16MHz Crystal Oscillator
  • 4 x Yellow LEDs
  • 1 x Green LED
  • 1 x Push button
  • 1 x MOSFET
  • 1 x LDO (3.3V)
  • 1 x LDO (5V)
  • 3 x Ceramic Capacitor (22pF)
  • 3 x Electronic Capacitor (47uF)
  • 7 x Polyester Capacitor (100nF)
  • 1 x Socket for ATMega 328p
  • 2 x I/O Connectors.
  • 1 x Connector header 6 pins
  • 1 x Barrel jack connector
  • 1 x ATmega 328p Microcontroller
• Arduino Audio Synth
  • 1 x Audio Synth Circuit Board
  • 1 x Resistor 100k Ohm
  • 1 x Resistor 10 Ohm
  • 1 x Audio Amplifier (LM386)
  • 1 x Ceramic Capacitor (47nF)
  • 1 x Electronic Capacitor (47uF)
  • 1 x Electronic Capacitor (220uF)
  • 1 x Polyester Capacitor (100nF)
  • 4 x connector pin header
  • 6 x potentiometer 10k Ohm with plastic knob
• Spare parts
  • 2 x Electronic Capacitor (47uF)
  • 2 x Polyester Capacitor (100nF)
  • 2 x Ceramic Capacitor (22pF)
  • 1 x Push button
  • 1 x Yellow LED
  • 1 x Green LED
• Mechanical Parts
  • 5 x Spacers 12mm
  • 11 x Spacers 6mm
  • 5 x bolt
  • 2 x bolt 12mm

WIKI