ODROID-C4 Starter Kit
From: €109,99 /€90,90 excl. VAT
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Description ODROID-C4 Starter Kit
This is the ODROID-C4. It's a new generation single board computer (SBC). It is an energy-efficient and more powerful variant of the ODROID-C2. It is an affordable ARM 64-bit computer. The main CPU of the ODROID-C4 is built with a quad-core Cortex-A55 cluster. It comes with a new generation Mali-G31 GPU. The A55 cores operate at 2,0GHz without thermal throttling using the standard heatsink. This creates a quiet and robust computer. The CPU multi-core performance is about 40% faster than the C2. The DRAM performance is about 50% faster than the C2.
Specifications ODROID-C4
- Form factor Board
- Dimensions: 85mm x 56mm x 1.0mm
- Heat sink Dimensions: 40mm x 32mm x 10mm
- Weight: 59g including heat sink - Processor Amlogic S905X3 12nm Processor
- L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
- L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
- L3 data cache: 512KB, 16-way set associative (512 sets), 64 byte lines, shared by 4 processors
- Quad Core Cortex-A55 (2.016GHz)
- ARMv8-A architecture with Neon and Crypto extensions
- Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) - Memory
- DDR4 4GiB with 32-bit bus width
- Data rate: 2640 MT/s (PC4-21333 grade)
- 1.2 Volt low power design - Storage
- 1x eMMC connector (8/16/32/64GiB are available)
- 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) - Networking
- 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
- Realtek RTL8211F (Ethernet transceiver)
- LED indicators
* Green LED: Flashing by data traffic at 100Mbps connection
* Amber LED: Flashing by data traffic at 1000Mbps connection
- Optional Wi-Fi USB adapters - Video
- 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) - Audio
- 1 x HDMI digital output
- 1x Optional SPDIF optical output - External I / O
- 4 x USB 3.0 Host ports (shares one single root hub)
- 1 x USB 2.0 OTG port for Host or Device mode. (no power input)
- 1 x Debug serial console (UART)
- 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND
1x SPI
1x UART
2x I2C
6xPWM
2x ADC input (12bit, 1.8V Max)
25x GPIO (Max)
- 1x Audio Expansion Header (7-pin, 2.54mm pitch)
1x DC 5V
1x SPDIF out
1x I2S
- All 3.3VI/O signal level except for ADC input at max 1.8Volt.
Vreko (verified owner) -
Looks good.
Vincent Veerman (verified owner) -
Easy and complete package, works fine