ODROID-N2+ – 4GB RAM
€118,96 /€98,31 excl. VAT
Out of stock | Maximum 10 boards per customer - Need more? Contact us!
Would you like to be notified when this product is back in stock?
Would you like to be notified when this product is back in stock?
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Description ODROID-N2+ - 4GB RAM
This is the ODROID-N2+ with 4GB RAM. It's a new generation single board computer (SBC). It is faster, more stable and more powerful than the ODROID N1. The main CPU is based on the big.Little architecture. It integrates a quad-core ARM Cortex-A73 CPU cluster. In addition, it integrates a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU. Thanks to modern 12nm silicon technology, the A73 cores work at 2,4Ghz. This creates a quiet and robust computer.
The CPU multi-core performance is about 20% faster and the 4GB DDR4 RAM is about 35% faster than the N1. The N2's DDR4 RAM works at 1230Mhz, which is more than 500Mhz higher than the DDR3 of the N1. The metal housing/heatsink is designed to dissipate heat from the CPU and RAM. The CPU sits on the bottom of the PCB, which gives it good thermal properties.
Specifications ODROID-N2+ - 4GB RAM
- Form factor Board
- Dimensions: 90mm x 90mm x 17mm
- Heat sink Dimensions: 100mm x 91mm x 18,75mm
- Weight: 200g including heat sink - Processor
- Amlogic S922X Processor (12nm fab)
- Quad-core Cortex-A73(up to 2.4Ghz) and Dual-core Cortex-A53 (up to 2Ghz)
- ARMv8-A architecture with Neon and Crypto extensions
- Mali-G52 GPU with 6x Execution Engines (800Mhz) - Memory
- DDR4 4GiB with 32-bit bus width
- Data rate: 2640 MT/s (PC4-21333 grade)
- 1.2 Volt low power design - Storage
- 1x eMMC connector (8/16/32/64GiB are available)
- 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) - Networking
- 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
- Realtek RTL8211F (Ethernet transceiver)
- LED indicators
* Green LED: Flashing by data traffic at 100Mbps connection
* Amber LED: Flashing by data traffic at 1000Mbps connection
- Optional Wi-Fi USB adapters - Video
- 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
- 1 x composite video (3.5mm jack) - Audio
- 1 x Stereo Audio line out (3.5mm jack
- 1 x HDMI digital output
- 1x Optional SPDIF optical output - External I / O
- 4 x USB 3.0 Host ports (shares one single root hub)
- 1 x USB 2.0 OTG port for Host or Device mode. (no power input)
- 1 x Debug serial console (UART)
- 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND
1x SPI
1x UART
2x I2C
25x GPIO (Max)
2 x ADC input (10bit, 1.8V Max)
All 3.3VI/O signal level except for ADC input at max 1.8Volt. - Other features
- We board RTC(Real Time Clock) IC to keep date and time. A CR2032 coin battery holder was replaced with the 2-pin 1.25mm pitch connector.
-No battery is included in the board. (CR2032 cell)
- You can keep the RTC time up to several years with a 200mAh CR2032 battery.
- 8MiB SPI Flash for boot manager
- IR receiver for remote controller
- Built with a large passive heat sink
System LED Indicators:
- Red (PWR) – Solid light when DC power is connected
- Blue (ALIVE) – Flashing like heartbeat while Kernel is running.
Active Cooling Fan Connector (5V 2-pin)
- Connector (2 pin, 1.25mm pitch) - Power
- 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
- DC 7.5V ~ 18V (up to 25W) *** 7.5V ~ 16V from 2022 production (LOT number starts with EL22)
– DC 12V/2A power adapter is recommended
- Power Consumption:
– IDLE : ≃ 2.2W (Performance governor)
– CPU Stress : ≃ 5.9W (@2016/2208MHz), 6.2W (@2016/2400MHz)
– Power off : ≃ 0.2W
Ton Rovers (verified owner) -
Seems to work fine, but it's a pity that eMMc memory is so expensive.
Jan Maarse (verified owner) -
works well