STM32 ARM Core development board – STM32F103C8T6

Description STM32 ARM Core development board -STM32F103C8T6

Specifications STM32 ARM Core development board

• ARM® 32-bit Cortex® -M3 CPU core
• 72 MHz maximum frequency, 1,25 DMIPS / MHz (Dhrystone 2.1) performance at 0 wait state memory access
• Multiplication in one cycle and hardware division
• Memories § 64 or 128 Kbytes Flash memory
• 20 Kbytes of SRAM
• Clock, reset and stock management
• 2,0 to 3,6 V application power and I / Os
• POR, PDR and programmable voltage detector (PVD)
• Crystal oscillator from 4 to 16 MHz
• Internal 8 MHz factory-trimmed RC
• Internal 40 kHz RC
• PLL for CPU clock
• 32 kHz oscillator for RTC with calibration
• Low power
• Sleep, stop and standby mode
• VBAT power supply for RTC and backup registers
• 2 x 12-bit, 1 μs A / D converters (up to 16 channels)
• Conversion range: 0 to 3,6 V.
• Dual sample and hold capability
• Temperature sensor
• DMA
• 7 channel DMA controller
• Supported Peripherals: Timers, ADC, SPIs, I2 Cs and USARTs
• Up to 80 fast I / O ports
• 26/37/51/80 I / Os, all assignable on 16 external interrupt vectors and almost all 5 V tolerant § Debug mode
• Serial debugging (SWD) and JTAG interfaces
• 7 timers
• Three 16-bit timers, each with up to 4 IC / OC / PWM or pulse counter and quadrature (incremental) encoder input
• 16-bit motor control PWM timer with dead time generation and emergency stop
• 2 watchdog timers (independent and window)
• SysTick timer 24-bit countdown
• Up to 9 communication interfaces
• Maximum 2 x I2 C interfaces (SMBus / PMBus)
• p up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
• Maximum 2 SPIs (18 Mbit / s)
• CAN interface (2.0B active)
• Full speed USB 2.0 interface
• CRC calculator, 96-bit unique ID
• Packages are ECOPACK®