Delivery throughout Europe

Ordered before 16:00 = Shipped today

Fast delivery with DHL

XNUMX days return *


Country

Raspberry Pi Starter Kit Manual

Assemble the Case

Step 1:

Make sure that the holes on the case are the same as those of the RPI

 

Step 2:

Mount the RPI on the acrylic plate using the bolts and nuts.

You can choose to use the spacers. We have not done this since it is not necessarily necessary.

 

Step 3:

Install the side walls as shown

Step 4:

Place the display on the RPI

INSTALL LCD DISPLAY

Introduction

This tutorial is written for users who are more familiar with the Raspberry Pi on Linux.

Step 1: Insert the SD card with Raspbian into the RPI

Step 2: Start the Pi

close the raspberry pi to a monitor using the HDMI cable.

A keyboard & mouse is required for the following steps.

Follow the instructions on the monitor and update it board.

Step 3: Download the driver

Open the terminal.

Put in:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

The screen should now work.

Step 4: Install virtual keyboard

Open the terminal.

Put in:

sudo apt-get install matchbox-keyboard

You can find the keyboard via: Menu> Accessories> Keyboard & Mouse

Step 5: Calibrate the touchscreen

Open the terminal.

Put in:

sudo apt-get install -y xinput-calibrator

You can now calibrate the display.

To apply the new values, the board do reboot.

Put in:

sudo reboot

Switch between LCD & HDMI

As soon as your LCD Display works, your HDMI output no longer works.

If you still want to work via a monitor, you can activate the HDMI output again.


Put in:


sudo ./LCD-hdmi
The rating of www.elektronicavoorjou.nl at WebwinkelKeur Reviews is 9.3/10 based on 4782 reviews.