ODROID-HC4
€117,95 /€97,48 excl. btw
27 op voorraad|Maximaal 5 boards per klant - Meer nodig? Neem contact met ons op!
Maximaal 5 boards per klant - Meer nodig? Neem contact met ons op!- Gratis verzending vanaf €74,95 NL. (€99,95 BE/DE)
- Voor 16:00 besteld = morgen in huis
- Express voor 10:30 besteld = vanavond in huis*
- 14 dagen gratis terugsturen*
- Ook af te halen bij ons in Leusden!
Beschrijving ODROID-HC4
De ODROID-HC4 is een nieuw Home-Cloud-platform. Het heeft dezelfde ARM CPU als de ODROID-C4. Er is een 12nm energie-efficiënte 1,8 GHz cortex-A55 quad core processor geïmplementeerd. Deze beschikt over snellere 4GB DDR4 RAM. Ook zit er een 16MiB SPI-flashchip op het board voor handige Petitboot-functie.
Specificaties ODROID-HC4
- FORM FACTOR
- Board Dimensions: 84mm x 90.5mm x 25.0mm
- Heatsink Dimensions: 40mm x 32mm x 10mm
- Weight: 280g including heatsink, fan and case - PROCESSOR
- Amlogic S905X3 Processor
- L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
- L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
- L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz)
- ARMv8-A architecture with Neon and Crypto extensions
- Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) - MEMORY
- DDR4 4GiB with 32-bit bus width
- Data rate: 2640 MT/s (PC4-21333 grade)
- 1.2Volt low power design - STORAGE
-1x Micro SD slot (DS/HS mode up to UHS-I SDR104) - NETWORKING
- 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
– Realtek RTL8211F (Ethernet transceiver)
– LED indicators
* Green LED: Flashing by data traffics at 100Mbps connection
* Amber LED: Flashing by data traffics at 1000Mbps connection - VIDEO
- 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) - AUDIO
- 1 x HDMI digital output - COOLER
- 1 x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board
- 1 x Hydraulic Bearing FAN
– Rated Voltage : 5V
– Rated Current : 100mA
– Max Speed RPM : 4,000
– Air Flow CFM : 4.3
– Air Pressure (In H2O) : 0.053
– Noise Level(dBA) : 23.9
– Dimension : 40 x 40 x 10.6 mm
– Wire & Connector : 80mm, 4 pin 1.25mm pitch - EXTERNAL I/O
- 1 x USB 2.0 host port
- 1 x Debug serial console (UART)
- 2 x SATA Connectors - OTHER FEATURES
- IR receiver for remote controller
- System LED Indicators:
– Red (POWER) – Solid light when DC power is connected
– Blue (ALIVE) – Flashing like heartbeat while Kernel is running. - POWER
- 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
- DC input : 14.5V ~ 15.5V
- DC 15V/4A power adaptor is recommended. Sold separately.
- Power consumption with two ST2000DM006 HDDs :
– IDLE(with HDD in spin-down) : ≃ 5.88W
– Active(using SAMBA): ≃ 15.59W
– Suspend: ≃ 0.29W
Beoordelingen
Er zijn nog geen beoordelingen.