Manual Raspberry Pi 4B starter kit
Connecting
Components:
Raspberry Pi 4B, Micro-HDMI Cable, USB-C Power Supply, Micro-SD Card, Housing
Step 1:
There are four red pins on the bottom of the housing, press the Raspberry Pi here so that it is properly down.
Step 2:
Place the top of the case and slide the Micro-SD card in the SD slot with the metal strips facing the PCB.
Step 3:
Then place the Micro-HDMI cable in the left port.
Step 4:
Connect your keyboard and mouse to one of the USB ports.
Step 5:
Finally, connect the power to the USB-C port to the left of the Micro-HDMI port.
Je Raspberry Pi start now!
Startup
Your setup is now ready to start.
If the de Raspberry Pi Now you start up you will see a desktop on your monitor. When you start up for the first time, you have to set it up, but that is explained step by step.
You can now start browsing, programming, editing texts and much more!
Heat sinks
Types:
Depending on the set of heatsinks in the kit, you can attach them as follows.
4 pieces:
You stick the large heatsink on the processor, the elongated one on the memory. and the two small ones on the right
3 pieces:
You stick the large heatsink on the processor, the elongated one on the memory. and small on the USB chip
Buyer:
Stick the copper heatsinks on the processor and memory.