Free shipping from € 74,95 NL (€ 99,95 BE / DE)

Ordered before 16:00 tomorrow Indoor

Express ordered before 10:30 am tonight at home*

14 days free return *



Prototyping

Prototyping means: an early model of a product, or rather a prototype. A project usually has gone through several phases before it becomes a final product. For example, you can use a breadboard test multiple phases of your project. You can use the jumper for this wires† These cables can be board plugged in without having to solder it.

If you are happy with the result of your project and you want to “record” it definitively. Then use one prototyping board† On this board you can easily solder the parts.

Result 1-12 is shown of the 326 results

  • GPIO Female Socket Riser Header - 2x2 4-pin

    GPIO Female Socket Riser Header - 2 × 2 4-pin

    1,20 /1,20 excl. VAT
  • DMSO2D72 3 in 1 Oscilloscope - Multimeter - Signal Generator

    Joy-it DMSO2D72 – 3 in 1 Oscilloscope, Multimeter, Signal Generator

    202,48 /202,48 excl. VAT
  • Joy-IT LCR-T7 component tester

    Joy-IT LCR-T7 component tester

    22,27 /22,27 excl. VAT
  • Velcro 15cm cable tie

    Velcro Cable Tie – 150mm

    0,62 /0,62 excl. VAT
  • Velcro 15cm cable tie

    Velcro Cable Tie – 150mm – 10 pieces

    4,09 /4,09 excl. VAT
  • Velcro 91cm

    Velcro Cable Tie – 91cm

    8,22 /8,22 excl. VAT
  • Sale! 608RS 608-2RS bearing

    608RS 608-2RS Bearing

    0,79 /0,79 excl. VAT
  • Sale! 623ZZ bearing

    623ZZ Bearing

    0,79 /0,79 excl. VAT
  • Sale! 608RS 608-2RS bearing

    625RS 625-2RS Bearing

    0,79 /0,79 excl. VAT
  • Sale! 8x10mm cylinder magnet

    Cylinder magnet (Ø x H) 8 x 10 mm

    0,79 /0,79 excl. VAT
  • USB OTG cable, micro USB, 15 cm

    Micro USB to USB OTG AF Cable – 15cm

    3,26 /3,26 excl. VAT
  • HBT4 housing

    ABS housing – 113 x 59 x 24mm

    4,09 /4,09 excl. VAT

Why buy prototyping?

What should you pay attention to when buying prototyping?

Prototyping is ideal if you want to practice programming. Through a breadboard you can move the cables as much as you want. You can also place the components in different places. You can use components more often, because you do not solder them. However, it is important that the parts are replaced after a while. This is because they qualitatively are less good. Take a resistance for example. After using it a number of times, it may provide less resistance. Then it is wise to use a new one. Have you found a setup that you are happy with? Then solder on one prototyping board the parts.
 

jumper wires

jumper wires are wires attached to a connector at the ends pine to have. because of this kun je componentsconnect them together without soldering. You often place the components on the breadboard† These can be done with the wires be connected to each other or to the in/out puts of the motherboard† The cables are available in different types. You have the male-male wire, the female-female wire and the male-female wire. The jumper wires are available in 10 or 20cm.  

The rating of www.elektronicavoorjou.nl at webwinkelkeurmerk.com is 9.2/10 based on 2108 reviews.