Raspberry Pi LiPo SHIM
€13,95 /€11,53 excl. VAT
10 in stock (can be backordered)
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Description Raspberry Pi LiPo SHIM
This LiPo SHIM offers a convenient way to Raspberry Pi boards to be supplied with power by means of LiPo/Lilon batteries. It is always difficult to have a discreet and neat power supply. The LiPo SHIM aims to provide your Pi with the most compact power supply.
You can solder the 0,8mm thick PCB directly to the GPIO pins of the Pi for a permanent solution. It is also possible to solder the supplied 2x6 Female Pin headers to the SHIM. This way you can remove the SHIM from the Pi at any time. This will block further use of those GPIO pins.
The SHIM uses Texas Instruments' TPS61232 step-up boost converter that provides up to 96% efficiency. The board features LEDs that indicate whether the board is on and if the battery is low.
Safety Note! Use this SHIM only with LiPo or LiIon batteries. Ensure any project with LiPos is adequately protected from denting, bending, puncturing or crushing† In addition, this SHIM cannot be charged on the battery and you will need a separate charger for the battery.
Features Raspberry Pi LiPo SHIM
- 0,8mm thick printed circuit board
- Shaped to be as low as possible on the Raspberry Pi to sit
- 2-pin JST connector, ideal for most LiPo/LiIon batteries
- LED indicators for power and low battery
- Provides up to 1.5A continuous current (15uA quiescent current)
- Low battery warning at 3,4V (GPIO #4 LOW)
- Auto power off at 3,0V to protect your battery
- VBAT+, GND and EN pins available to break out
- 2x6 0.1" Female header (optional, for non-permanent installation)
- Includes rubber foot to keep LiPo SHIM away from the Raspberry Pi
- LiPo SHIM pinout
- Compatible with all 40 pin header Raspberry Pi-models
- Requires soldering
- Battery not included
Reviews
There are no reviews yet.