Heatsink Case With Fan Black – Raspberry Pi 4B
€16,95 /€14,01 excl. VAT
127 in stock (can be backordered)
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Raspberry Pi 4 heatsink case with fan (black)
Hold you Raspberry Pi extra cool with this dual fan heatsink case for the Raspberry Pi 4 Model B. This heatsink case has a 3-in-1 design with the heat sink, dual cooling fans and housing. That's both passive and active cooling for you Raspberry Pi. Are you looking for the heatsink case for the Raspberry Pi 5? Then click on this link.
Features heatsink case with fan:
- Top and bottom cabinet made of anodised aluminum
- Heat sinks
- Double 5V fans
- Thermal pads
- Simple assembly
- Silent operation
- Perfect compatibility with Raspberry Pi 4
- Accessibility to all ports, pins and connectors
- Hex bolts and Allen key included
MD (verified owner) -
Cools well, solidly. I'm going to make a small grid about the fans myself because I also use the Rpi on the road.
Jan Wilkens (verified owner) -
fully meets the need
Pim (verified owner) -
Nice thing, but don't select a separate heat sync when you order...
Winfried (verified owner) -
Does what it's supposed to do. Fan is usually fairly quiet, sometimes slightly audible.
lorenz kockaerts (verified owner) -
works great for retropie
Albert Etten (verified owner) -
Great cooler. The fan is not necessary at light loads. Raspberry Pi 4 2GB remains at a stable 30 degrees.
Robin Bouwman (verified owner) -
Good stuff 💪🏻
. (verified owner) -
..........
Anonymous (verified owner) -
Good quality/price ratio.
Frank Pacen (verified owner) -
fits perfectly
Peter Bankras (verified owner) -
Nice and quiet
Henk van de Kamer (verified owner) -
Temp CPU now 37 degrees instead of 59 with passive cooler
Simon Bushman (verified owner) -
First product.
Halil Ozcal (verified owner) -
Great product
Chris Omloo (verified owner) -
necessary good working product
Eric de Haan (verified owner) -
Works great, cools well !!
Freek Van Beenen (verified owner) -
Good service
frank (verified owner) -
very beautiful
Guido Smulders (verified owner) -
Nice solution to keep your pi well cooled.
Bottoms -
Works okay, just be careful with mounting (rotating parts above) and connecting!
Mark Public (verified owner) -
great product and with matching heat pads.
Peter Lauraman (verified owner) -
Good cooling for the raspberry pi
Wim van Drie (verified owner) -
Provides good protection. Thermal and physical. Bit of thick thermal tape between heatsink and components to be cooled. Manual is missing.
Harold Tielkes (verified owner) -
Great product
Wouter (verified owner) -
Cools fine. but it remains an open system. Not really a box around the Pi. Moving parts of the fan on the outside.
Ayoub Benniss (verified owner) -
Ventilation helps! Only does not protect the sides from the raspberry
Jan Broekema (verified owner) -
easy to assemble and works great, only a paper document about the connection of the fans would be good..
Dirk VanLaer (verified owner) -
40 pin connector (from starter kit for Arduino & Raspberry) is too wide when using the heatsink case.
Jan Owl (verified owner) -
If the processor is used a lot, then this is the advice to really keep the temperature of the CPU below 50 degrees
Peter Amfu (verified owner) -
“good” is only 4 characters long
Harry (verified owner) -
nice product
Shah Ansaric (verified owner) -
I was worried about the noise but you don't hear anything. Nothing at all.
Luke Idenburg (verified owner) -
The Heatsink works very well, the assembly was also very easy, only removing the tape from the stickers was a bit difficult, the fans do indeed make virtually no noise. A really nice case
D331d32 -
Assembly did not fully correspond to the video of Electronics For You. I got 12 screws and had to screw the two fans on myself. I also had to stick the stickers that connect the CPU to the heatsink myself (in the video that was already done when it came out of the package). That is sticking, especially because it is not clear whether there is foil on both sides of the stickers or not (other editions of this heatsink have stickers on both sides, it seems that it has only one side). For the rest, it seems to work fine.