Arduino MKR Zero
€31,82 /€26,30 excl. VAT
Available via backorder
- Free shipping from € 74,95 NL. (€ 99,95 BE / DE)
- Ordered before 16:00 tomorrow Indoor
- Express ordered before 10:30 am tonight at home*
- 14 days free return *
- Can also be collected from us in Leusden!
Description Arduino MKR Zero
The MKR ZERO gives you the power of a Zero in the smaller size defined by the MKR form factor.
The MKR ZERO board serves as a great educational tool for learning about 32-bit application development.
It has a built-in SD connector with special SPI interfaces (SPI1) that allow you to play with MUSIC files without additional hardware!
This board is powered by Atmel's SAMD21 MCU, which has a 32-bit ARM Cortex® M0 + core.
Warning: Unlike most Arduino-boards, the MKR Zero runs at 3,3V.
The maximum voltage that the I / O pins can tolerate is 3,3 V.
Applying voltages higher than 3,3 V to an I / O pin can damage the card.
Although output to 5V digital devices is possible, bidirectional communication with 5V devices should be moved correctly.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable or power it with a LiPo battery.
The battery voltage can also be monitored because there is a connection between the battery and the card's analog converter.
Specifications of the Zero:
microcontrollers | SAMD21 Cortex-M0 + 32bit low power ARM MCU |
Board Power Supply (USB/VIN) | 5V |
Supported Battery (*) | Li-Po single cell, 3.7V, 700mAh minimum |
DC Current for 3.3V Pin | 600mA |
DC Current for 5V Pin | 600mA |
Circuit Operating Voltage | 3.3V |
Digital I / O Pins | 22 |
PWM Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 - or 19) |
UART | 1 |
SPI | 1 |
I2C | 1 |
Analog Input Pins | 7 (ADC 8 / 10 / 12 bit) |
Analog Output Pins | 1 (DAC 10 bit) |
External Interrupts | 9 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) |
DC Current for I / O Pin | 7 mA |
Flash Memory | 256 KB |
Flash Memory for Bootloader | 8 KB |
SRAM | 32 KB |
EEPROM | No. |
Clock Speed | 32.768 kHz (RTC), 48 MHz |
LED_BUILTIN | 32 |
Full-Speed USB Device and embedded Host |
Bass Prince (verified owner) -
Great genuine Arduino with a powerful processor. Delivered quickly and neatly.